4) Configure client serial port settings: In Serial port setup, set the following options A - Serial device: /dev/ttyS0 E - Bps/Par/Bits: 115200 8N1. 4b) Using 7.10 on the server, I needed to set the following on the client: F - Hardware Flow Control: No. An Arch Linux machine can be configured for connections via the serial console port, which enables administration of a machine even if it has no keyboard, mouse, monitor, or network attached to it. Installation of Arch Linux is possible via the serial console as well. M ost embedded Linux / BSD systems such as routers, servers and nas devices comes with console interface (serial port with RS-232). BIOS can uses this, and after boot BIOS screen I/O is redirected so that you can use the device. The cu command is used to call up another system and act as a dial in terminal.
I figured I'd give a rundown of serial terminals I regularly use on Linux to access consoles on embedded boards through a serial port. I tend to favor both Putty (runs on Windows and Linux) and screen, but a couple others are listed here as well.
Linux Serial Port Tool
This is a GUI that's pretty feature rich. It can also be used for SSH and telnet.
This will bring up the putty GUI an you can then select serial, enter the device path '/dev/ttyUSB0', and enter the baudrate.
This is a console based program that's not easy to use for the beginner, but it's very powerful.
This is a console based program that's tried and true, but not easy to use for the beginner. Adobe photoshop cs5 download link windows 10.
Linux Serial Monitor Gui
You can then follow the menu options to configure the serial port and get on your way.
This is a GUI that's pretty bare bones.
Now, you can use the GUI to configure and open the serial port device.
Linux Serial Port Command
Have a program you prefer that's not listed? Put it in the comments.