Posted  by 

Cruise Mode Traktor

  • This topic has 10 replies, 1 voice, and was last updated 8 years, 5 months ago by .
Cruise mode traktor gameCruise Mode TraktorTraktor cruise mode shuffleModeMode

Cruise Mode Traktor Download

  • I have traktor pro 2 installed and my hercules e2 controller works fine with it, all controls are fine but no sounds played through traktor play.
    Under Audio setup i have the following settings:
    Audio device: ASIO4ALL v2
    Sample rate: 24000Hz
    Latency: 512

    Then under the ‘Built in soundcard’ bit i have ASIO4ALL selected again. The only other choice being something called” Conexant 20561 smartaudio ( (Wassapi) (Shared mode))”

    I have no idea what to do with input & output routing, but have had no luck with just guessing. could really use some help people. if you need any more info, let me know. thanks

    On Audio Setup, select “ASIO4ALL” for audio device. Then, on Output Routing, select “Internal” for mixing mode, on Out Master select 1: Front Left, then 2: Front Right. Output Monitor should be 3: Back Left, then 4: Back Right.

    Degenerate, post: 21893, member: 2367 wrote: Alvin, in output routing the only options available for anything under the output routing tab is, “HD Audio digital out 1” and “HD Audio digital out 2”. Oh and im using a hercules e2 mixer so i’d need to use external mixer right? cheers man

    So I’ve checked your controller the Hercules E2, and learned that it doesn’t have a built-in soundcard. And, the computer that you are connecting to is using a Digital-Out interface, which means your ordinary 3.5mm will not work with it. You will need a S/PDIF is a digital audio interconnect to RCA cable to be able to connect it to an external mixer or speakers.

    Try using Conexant 20561 smartaudio ( (Wassapi) (Shared mode)) as your audio setup and use “internal” in your output routing select “anything” that is available on your drop down list and see if any sound is produced in your computer.

    If it still doesn’t work, then your computer’s soundcard doesn’t support external audio routing, you may need to buy a DJ soundcard like one of these: http://www.digitaldjtips.com/2010/11/6-budget-dj-sound-cards/

    Degenerate, post: 21893, member: 2367 wrote: Alvin, in output routing the only options available for anything under the output routing tab is, “HD Audio digital out 1” and “HD Audio digital out 2”. Oh and im using a hercules e2 mixer so i’d need to use external mixer right? cheers man

    So I’ve checked your controller the Hercules E2, and learned that it doesn’t have a built-in soundcard. And, the computer that you are connecting to is using a Digital-Out interface, which means your ordinary 3.5mm will not work with it. You will need a S/PDIF is a digital audio interconnect to RCA cable to be able to connect it to an external mixer or speakers.Free download winzip full version with crack.

    Try using Conexant 20561 smartaudio ( (Wassapi) (Shared mode)) as your audio setup and use “internal” in your output routing select “anything” that is available on your drop down list and see if any sound is produced in your computer.

    If it still doesn’t work, then your computer’s soundcard doesn’t support external audio routing, you may need to buy a DJ soundcard like one of these: http://www.digitaldjtips.com/2010/11/6-budget-dj-sound-cards/

    Degenerate, post: 21893, member: 2367 wrote: Alvin, in output routing the only options available for anything under the output routing tab is, “HD Audio digital out 1” and “HD Audio digital out 2”. Oh and im using a hercules e2 mixer so i’d need to use external mixer right? cheers man

    So I’ve checked your controller the Hercules E2, and learned that it doesn’t have a built-in soundcard. And, the computer that you are connecting to is using a Digital-Out interface, which means your ordinary 3.5mm will not work with it. You will need a S/PDIF is a digital audio interconnect to RCA cable to be able to connect it to an external mixer or speakers.

    Try using Conexant 20561 smartaudio ( (Wassapi) (Shared mode)) as your audio setup and use “internal” in your output routing select “anything” that is available on your drop down list and see if any sound is produced in your computer.

    If it still doesn’t work, then your computer’s soundcard doesn’t support external audio routing, you may need to buy a DJ soundcard like one of these: http://www.digitaldjtips.com/2010/11/6-budget-dj-sound-cards/

    3D 5.1 soundcards will work as long as you have two separate outputs. But, if you want to connect it to high-powered mixers and speakers, then I recommend buying a DJ soundcard from numark or native instruments. That way there would be no distortion if you pump up the volume.

  • Posts
  • The forum ‘DJing Software’ is closed to new topics and replies.

Traktor Cruise Mode Not Working

About In this tutorial we will show you how to use the Cruise Mode in TRAKTOR PRO 2 for automatic playback of your tracks.This is a useful feature for situations where you may need to leave your computer or want TRAKTOR to automatically play through a prepared playlist. Nov 21, 2013 Traktor pro has a cruise mode function thus what I suggested is not new! Any suggestions for MIK team is bad, for example, SERATO don't have effects for many years, or the AUTOMIX function is not important FOR A PROFESSIONAL DJ. Hi All, Just a quick question: Does Traktor Duo version include Cruise (autoplay) mode? The user manual says the panel where you select Cruise is not available in Duo & LE, but farther down in the manual, it says Cruise mode is not available only in LE. Apologies if this has been asked before, I did do a quick search before posting. I'm a new Tracktor Pro 2 user, and i seem to encounter a reoccurring problem from time to time whereby when I enable cruise mode, the mixer starts to immediately crossfades over to the second deck whenever I hit the button, rather than waiting for the end of the track or another cue marker (there are no.