Posted  by 

Conceala 2 Cistern Problems

CCleaner - 5.43.6522 Updated 2018 Crack Plus Keygen Licence Key Full Version 2018 1 1 comment Mixcraft - 8.2 Crack Plus Keygen Full Path Free Download Updated 2018. Mocha Pro 5.5.2 Crack Activator Free Download is used to drive the 2D and 3D tracking, and motion tracking etc. It is helpful to remove the unwanted wires, elements, rigs and tracking marks. It adds GPU-accelerated planar tracking for increasing the speed and stability. Mocha pro 5.5 2 crack.

Conceala 2 cistern leaking

NBS Plug-in for Autodesk® Revit® v3.8 update is available. Learn more

Conceala 2 cisterns E4437 Contemporary flush plate, dual flush, Ideal Standard logo for Conceala 2 cisterns ILLUSTRATED PRODUCT DETAILS Weights S3625 3.00 KG Materials S3625 Plastic Finishes S3625 Neutral / No Finish (67) Capacity S3625 6.0 litres Standards Cistern to BS EN 14055 Special Notes Cistern is supplied with 2 x 800mm lengths of. Conceala 2 ducted pneumatic valve cisterns in plastic are suitable for low level applications. Supplied with components pre-fitted to reduce installation time, the cisterns are also suitable for furniture use. Single or dual flush push button operation Product Features. Conceala 2 cistern and cover. Spare cistern parts for Armitage Shanks toilets and cisterns. Armitage Shanks flush valve. Armitage Shanks flush plate. Branded Armitage Shanks genuine toilet spares.

Select regional version:

Download

Amstd Fastpart Spares Ideal Standard Armitage Shanks Toilet Cistern Spares Conceala Plastic hose for conceala 2 uni valve bottom inlet SV81567 / 270 £38.99 Add to Cart.

The object content is configured for use in UK, but it may also be suitable for use in other locations.

Conceala 2 ducted pneumatic valve cisterns in plastic are suitable for low level installation. Supplied with components pre-fitted to reduce installation time. Single push button or lever operation. Where access allows for bottom inlet, water saving delay fill cisterns can be used.

  • Components pre-fitted
  • Compact design
  • Push button operation

Object covers;

  • S364067 Conceala 2 cistern 4.5 litre single flush valve side supply and internal overflow, alternative height plastic flushbends.
  • S361767 Conceala 2 cistern 4.5 or 6 litre single flush syphon side supply and internal overflow plastic flushbend, long cp lever.
  • S427067 Conceala 2 cistern 4.5 litre single flush valve delay fill bottom supply and internal overflow, alternative height plastic flushbends.
  • S363567 Conceala 2 cistern delay fill 4.5 litre single flush syphon low level bottom supply and internal overflow plastic flushbend, cp lever.
  • S362267 Conceala 2 cistern 6 litre single flush valve side supply and internal overflow, alternative height plastic flushbends, no push button.
  • S363667 Conceala 2 cistern delay fill 4.5/3 litre dual flush valve bottom supply and internal overflow, alternative height plastic flushbends, no flushplate.
  • S362367 Conceala 2 cistern 6 litre single flush valve side supply and internal overflow, alternative height plastic flushbends, no push button.
  • S362567 Conceala 2 cistern 4/6 litre dual flush valve bottom supply and internal overflow, alternative height plastic flushbends, no flushplate.
  • S364367 Conceala 2 cistern 4.5/3 litre dual flush valve side supply and internal overflow, alternative height plastic flushbends, no flushplate.
  • S362067 Conceala 2 cistern 4.5 or 6 litre single flush syphon side supply and internal overflow, alternative height plastic flushbends, no lever.
  • S361967 Conceala 2 cistern 6 litre single flush syphon bottom supply and internal overflow plastic flushbend, cp lever.
  • S362167 Conceala 2 cistern 4.5 or 6 litre single flush syphon bottom supply and internal overflow, alternative height plastic flushbends no lever.
  • S362667 Conceala 2 cistern 6 litre single flush syphon high level side supply and internal overflow, lever with chain.
  • S362467 Conceala 2 cistern 6/4 litre dual flush valve top inlet and internal overflow, alternative height plastic flushbends.
  • S364067 Conceala 2 cistern 4.5 litre single flush valve side supply and internal overflow, alternative height plastic flushbends.
Platform Compatible Version Certified to
Revit 2015 + 1 1.3
  • More information
  • More BIM objects

More information

Cistern
NBS specification data

More BIM objects

To embed this BIM object onto your website, simply copy and paste the HTML code below.

Conceala 2 Cistern Problems
<iframe src='https://www.nationalbimlibrary.com/en/syndicationgeneration/iframesingle/?objectId=238291' frameborder='0' width='225' height='285'></iframe>

Technical help

Contact a technical consultant at Armitage Shanks to find out more about Conceala 2 Cisterns.

This article will cover the most common issues and questions concerning the Duo Flush Converter and its installation.

You can also watch this video:

Read any of the following below if:

Or Watch the instructional video for the Duo Flush System Toilet Converter

1. The Full and / or Half flush closes immediately after tank lever is released.

    1. Set water level higher: Water level should be half way to all the way over the oval windows of the Duo Flush valve (See picture below). If your water level cannot be increased, the Duo Flush system should not be used.
  1. Once water level has been set, set both adjustment dials to maximum setting.
  2. Place 3 pieces of toilet paper in the bowl and flush, if the bowl evacuates the toilet paper, lower the green dial setting by one number and repeat flush.
  3. Continue this process until toilet does not evacuate the paper and adjust dial up 1 setting. This is the lowest possible setting while maintaining a good half flush.
  4. Set the BLUE dial one to two settings higher than that of the GREEN dial.

2. Water level is half way or completely over the oval opening and the full and half flush are working but the bowl is not clearing out.

  1. Make sure the water level in the toilet bowl is up to its highest capacity.
  2. Make sure the refill tube (rubber hose) is supplying water down the overflow pipe and not into the tank.
  3. Adjust the roller clamp on the refill tube so that it is allowing full flow. The “Rolling Pin” should be set to “8” which is full flow.
  4. Using the GREEN dial, adjust the half flush setting one setting higher.
  5. Repeat this process until the proper water level is reached.
  6. If you are not using Fluidmaster’s PerforMAX fill valve, your fill valve may not have enough output to refill the bowl. Fluidmaster recommends using the 400AH PerforMAX Fill Valve.

3. Fill valve turns on and off periodically (ghost flushing).

Leaking

Water is leaking from the tank into the bowl at one or more leak points. Follow the steps below:

  1. Remove the Duo Flush valve from the valve seat and clean both the Duo Flush seal and the plastic seat the seal sits upon.
  2. Pull angled seat adapter straight up until it pulls free from flush valve seat. Turn adapter upside down and reshape putty ring, spread putty evenly around entire base of adaptor.
  3. Check the black seal at the base of your original flush valve/ overflow pipe unit. If you get black residue on your fingers when you touch the seal, replace the flush valve. If seal is good reseat angled seat adaptor.
  4. Inspect the overflow pipe for obvious cracks.
  5. Make sure the refill tube (rubber hose) is clipped to the side of the overflow pipe and not directly shoved into the overflow pipe.
  6. Replace Duo Flush onto valve seat and turn on water, check for leaks.

4. Removing the Duo Flush valve from the seat

  1. Gently rock the Duo Flush canister away from the overflow pipe and pull up.

Conceala 2 Cistern Problems Of The Heart

5. Removing the activation box (both newer and older versions of the converter) once it has been snapped onto to the tank lever.

  1. On older versions of Duo Flush, grab hold of the activation box in the tank and pull it toward the back of the tank. You may need to give it a strong jerk to unsnap it.
  2. On newer versions on the Duo Flush, there is a push button on top of the activation box. Simply push in the button and pull away from the tank lever.

6. The tank lever sticks in the up or down position, it does not return to a horizontal position after you flush.

Remove the toilet lever from the tank and remove the black spacer from the tank lever spacing nut, follow these steps:

  1. Push the button on the top of the actuator handle box and release the box and cable from the tank lever thread.
  2. Remove the lock nut from toilet handle thread; this is a reverse threaded nut, turn nut counterclockwise to release the nut.
  3. Remove the toilet handle from the front of the tank.
  4. Remove the black rubber (square shaped) spacer from tank lever’s spacing nut.

Replacing tank lever:

Conceala 2 Cistern Leaking

  1. Replace tank lever back into the tank’s lever mounting hole. Make sure to push the lever all the way in ensuring the tank lever is flush with the face of the tank.
  2. Tighten lock nut onto the tank lever thread; this is a reverse threaded nut, turn nut clock wise to tighten nut.
  3. Snap actuator box onto tank lever thread.
  4. Replace the tank lever without the spacer and retry the flush.

Or Download the Duo Flush System Toilet Converter installation instructions