Posted  by 

2004 Acura Mdx Radio Code

  1. Acura Mdx Radio Code Reset
  2. 2004 Acura Mdx Radio Code Location
  3. Acura Mdx Code For Radio
  4. Acura Mdx Radio Replacement
  5. 2002 Acura Mdx Radio Code
2004 acura mdx radio code error

Acura:Accessing Diagnostic Trouble Codes

Acura Mdx Radio Code Reset

86-94 Acura

The Engine Control Unit (ECU) stores trouble codes. On theoutside of the ECU case are one or two LEDs. If the ECU has 2 LEDs, ignorethe Amber LED and look at the RedLED. On 87-89 models, the ECU islocated beneath the front passenger seat. 1990-1994 models locate the ECUunder the dashboard on the passenger’s side beneath the carpet. Legend modelsprovide a flip-out mirror that allows you to view the LEDs. Earlier modelshave a “window” at the base of the passenger front seat that allows you toview the LEDs.

image used with permission Copyright © 2002 ALLDATALLC.

Acura MDX Navigation Display 2004. Hotspot shield launch free download windows 7 crack. Part Number: 39810-S3V-A210-M1, 39810-S3V-A210, 39810S3VA210M1, 39810S3VA210. Retrieving Your Acura Radio or Navi code.

How to Get Your Acura Radio Code. There are a number of ways to retrieve your Acura MDX Radio Code, or whichever Acura model you own– older, such as the Acura TL and TSX or newer, such as the Acura TLX and redesigned RDX. First, check the inside of your glove box. Look for a radio code decal stuck on the wall inside. If it’s not there. Acura MDX: Stereo Radio (OEM Number 39100S3VA61). Acura radio code can also be obtained from Dealer by calling the numbers below. You can call Client Services, but you will be required to provide your VIN number, radio serial number, as well as proof of ownership. Acura Client Services: 1-800-328-2238. Honda America Client Services: 1-800-999-1009. 2003 2004 acura mdx radio am-fm-cassette-6 cd part number 39100-s3v-a500 oem used in great tested condition taken from car in use, all our item safe indoor warehouse, fast free shipping 5 days delivery warranty radio code unlock 65645.

The Check Engine light will illuminate when the ECU storesa trouble code.

Counting the Flashes

To retrieve trouble codes, turn the ignition key to the “on”position with the engine off.86-89 models:The ECU will flash many short blinks. The total number ofblinks equals the code number. For example, 12 short blinks equals code 12,nine short blinks equals code 9, etc. If more than one code is stored, theECU will flash the codes in sequence (lowest to highest) with a pause betweeneach code. The codes will repeat until the key is turned to the OFF position.90-94 models:The ECU will flash a long blink to represent the first digitof the code, then a series of short blinks to represent the second digit.For example, 1 long blink, followed by 4 short blinks equals code 14. Fourlong blinks followed by five short blinks equals code 45.
NOTE: Legend Models: If code 7 or 17 is stored and the S4 light onthe transaxle indicator panel is also flashing, it may be necessary to diagnosethe automatic transaxle control unit.

86–90 Legend& 86–91 Integra

In the event of a PGM-FI systemmalfunction, the engine warning lamp will light and stay lit. When this conditionoccurs, it will be necessary to inspect the ECU LED display. On Integra models,the ECU contains a single red LED display. On Legend models, the ECU containsa red and a yellow LED display. The red LED should be used for both modelswhen diagnosing PGM-FI system malfunctions. When the engine warning lampis illuminated, proceed as follows:2002 acura radio code reset
  1. On all models except 1991Integra, move front passenger seat to rear position.
  2. On 1991 Integra models, pulldown passenger side carpet from under dashboard.
  3. On all models, turn ignitionOn and observe red LED on front or top of ECU. The LED will indicate diagnostictrouble codes (DTCs) by number of flashes.

2004 Acura Mdx Radio Code Location

NSX, Vigor, 91–95Legend, 92–95 Integra & 91–96 NSX

In the event of a PGM-FI systemmalfunction, the Check Engine lamp will light and stay On. When this conditionoccurs, proceed as follows:
  1. Using a jumper wire, connectterminals of service check connector.
Service checkconnector location.91–95 Legend & 91–96 NSX
Service checkconnector location.92–95 Integra
  1. The Check Engine lamp willindicate DTCs by the number of flashes.

96–01 Integra

When the Malfunction IndicatorLamp (MIL) has been on or if there is driveability problem, proceed as follows:
  1. To use OBD II scan tool, proceedas follows:
    1. Connect scan tool to 16-pindata link connector (DLC) located behind RH side of front console.
    Scantool connection location. 96–01 Integra
    1. Turn ignition On.
    2. Follow scan tool manufacturer’soperating instructions to access DTCs.
  1. To use MIL, proceed as follows:
    1. Connect SCS service connectorspecial tool No. 07PAZ-0010100, or equivalent, to service check connectorlocated under passenger’s side of dash.
Service check connector location.96–01 Integra
    1. Turn ignition On.
    2. MIL will indicate DTC(s) by number of flashes.

97–01 NSX

When Malfunction Indicator Lamp (MIL) has been on or there is driveabilitycondition, proceed as follows:
  1. To use OBD II scan tool, proceed as follows:
    1. Connect scan tool to 16-pin data link connector (DLC) located underglove compartment under a removable cover.
    2. Turn ignition On.
    3. Follow scan tool manufacturer’s operating instructions toaccess DTCs.
  2. To use MIL, proceed as follows:
    1. Connect SCS service connector special tool No. 07PAZ-0010100, orequivalent, to service check connector located under passenger’sside of dash
    2. Turn ignition On.
    3. MIL will indicate DTC(s) by number of flashes.
2004 acura mdx radio code code lock

2.2CL, 2.3CL, 2.5TL, 3.0CL, 3.2CL, 3.2TL 3.5MDX & 3.5RL

When Malfunction Indicator Lamp (MIL) has been on or there is driveabilityproblem, proceed as follows:
  1. To use OBD II scan tool, proceed as follows:
    1. Connect scan tool to 16-pin data link connector (DLC) located behindor under the ashtray on center console.
    2. Turn ignition On.
    3. Follow scan tool manufacturer’s operating instructions to accessDTCs.
  2. To use MIL, proceed as follows:
    1. Connect SCS service connector special tool No. 07PAZ-0010100, orequivalent, to service check connector located under passenger’sside of dash.
    2. Turn ignition On.
      1. MIL will indicate DTC(s) by number of flashes.

SLX

Connect a suitable scan tool to the DLC (Data Link Connector), located atthe lower LH of the instrument panel behind a small square cover.

Acura: Clearing Diagnostic Trouble Codes

Legend, Vigor, 86–95 Integra & 91–96 NSX

After making all necessary repairs, the DTCs should be cleared as followsfrom the ECU memory.
  1. On 86–89 Integra models, remove hazard fuse at battery positiveterminal for approximately 10 seconds to clear all stored DTCs.
  2. On 90 Integra models, remove hazard fuse in main fuse box for approximately10 seconds to clear all stored DTCs.
  3. On 91–95 Integra models, remove back-up fuse from under hood fusebox for approximately 10 seconds to clear all stored DTCs.
  4. On 86–90 Legend models, remove alternator sense fuse in underhoodrelay box for 10 seconds to clear all DTCs.
  5. On 91–95 Legend models, remove No. 15 fuse from under dash fusebox for 10 seconds to clear all DTCs. This will also cancel power seat settings.
  6. On NSX models, remove clock fuse from main relay box, located in luggagecompartment on RH side, for approximately 10 seconds to clear all DTCs.This will also cancel radio presets and clock setting.
  7. On Vigor models, remove back-up fuse from under hood fuse/relay box forapproximately 10 seconds to clear all DTCs. This will also cancel radiopresets and clock setting

2.2CL, 2.3CL, 2.5TL, 3.0CL, 3.2CL, 3.2TL, 3.5 MDX, 3.5 RL,

Acura Mdx Code For Radio

96–01 Integra & 97–01 NSXIf using scan tool, follow scan tool instructions to clear ECM/PCM memory.If using MIL, turn ignition Off. On models except NSX and 99–01 3.2TL,removeBackup Radio Fuse from underhood fuse relay box for 10 seconds. On NSX models,remove Clock Fuse from underhood fuse relay box for 10 seconds. On all models,disconnect SCS service connector. On 99–01 3.2TL models, remove ClockBackup Fuse from passenger compartment under dash fuse relay box for 10 seconds.On all models, disconnect SCS service connector.

SLX

Acura Mdx Radio Replacement

Follow scan tool instructions to clear PCM memory.

Trouble codes

2002 Acura Mdx Radio Code

2004
Vigor,Legend
2.2CL
2.3CL
2.5TL
3.0CL
3.2CL
3.5RL
SLX
AcuraBasic Codes
88–95
Integra
NSX
96–01
Integra
3.2TL
97–01
NSX
3.2TL& 3.5L MDX
ModelYearEngine identificationSystem
2.2CL1997F22B1Honda PGM-FI
2.3CL1998-99F23A1Honda PGM-FI
2.5TL1995-98G25A4Honda PGM-FI
3.0CL1997-99J30A1Honda PGM-FI
3.2CL2000-03J32A1/2Honda PGM-FI
3.2TL1996-98C32A6Honda PGM-FI
3.2TL1999-03J32A1Honda PGM-FI
3.5RL1996-04C35A1Honda PGM-FI
Integra 1.8L1996-01B18B1Honda PGM-FI
Integra 1.8L VTEC1996-01B18C1/C5Honda PGM-FI
MDX 3.5L2000-06J35A3/5Honda PGM-FI
MDX 3.7L2007-09J37A1Honda PGM-FI
NSX/NSX-T 3.0L1991-05C30A1Honda PGM-FI
NSX/NSX-T 3.2L1997-05C32B1Honda PGM-FI
RDX 2.3L2007-09K23A1Honda PGM-FI
RL 3.5L2005-08J35A8Honda PGM-FI
RL 3.7L2009J37A2Honda PGM-FI
RSX 2.0L2002-06K20A2/3Honda PGM-FI
SLX 3.2L1996-976VD1Isuzu MFI
SLX 3.5L1998-996VE1Isuzu MFI
TL 3.2L2004-08J32A3Honda PGM-FI
TL 3.5L2007-08J35A8Honda PGM-FI
TSX 2.4L2004-09K24A2Honda PGM-FI